The device can be restarted using the slider. To do this, unscrew the cap. If the trap is still turned on, switch the slider to "OFF" once. Then wait 30 seconds before switching the slider back to “ON.”
Important: After every restart, the device displays a test image.
Once this is complete, the startup sequence begins:
- The green LEDs on the bottom bar indicate the battery status immediately after the restart
- The LEDs on the top bar initially flash yellow alternately; the device is searching for a signal, after which it displays the signal strength using blue LEDs on the top bar
- The single yellow LED then flashes, indicating the upload status of the captured image.
Once the image is uploaded, the LED stops flashing.
After about 5 minutes, the camera has restarted. The LEDs turn off, and you should receive an image in the app.
